| Note: This article may contain affiliate links, which means if you make a purchase following our links won’t cost you extra, but we may earn a commission. Learn more |
The Bravos dryer not turning on is a common issue that can be attributed to various factors. This problem is not exclusive to the Bravos dryer, as the Maytag Bravos dryer and Bravos XL washer also experience similar difficulties.
The Bravos dryer not starting is often due to a blown thermal fuse. This safety device is designed to prevent the dryer from overheating. If the dryer gets too hot, the thermal fuse will blow, disabling the appliance. It’s a straightforward fix, requiring the replacement of the fuse.
The Maytag Bravos dryer not turning on could be a result of a faulty door switch. This switch is responsible for detecting if the dryer door is open or closed. If it’s defective, the dryer won’t start. A simple test with a multimeter can confirm if the door switch needs replacing.
The Bravos XL washer not turning on might be due to a malfunctioning lid switch. This switch is designed to detect if the washer lid is open or closed. If it’s faulty, the washer won’t start. Just like the door switch in the dryer, a quick test with a multimeter can determine if the lid switch is the problem.
The Maytag Bravos XL dryer not turning on could be due to a defective start switch. If the start switch is faulty, it won’t send the necessary voltage to the drive motor and the dryer won’t start. A multimeter can be used to test the start switch for continuity.
In the case where the Bravo dryer won’t turn on, it could be due to a worn-out drive belt. The drive belt is a long, slender belt that wraps around the dryer drum, around a tension pulley, and then around the drive motor.
Over time, the drive belt can wear out and break, causing the dryer not to turn on. A visual inspection can confirm if the drive belt is the issue.
7 Common Reasons bravos dryer not starting and Their Solutions
1. Power Supply Issues
A common reason for a Bravos dryer not starting could be power supply issues. This could be due to a tripped circuit breaker, a blown fuse, or a power outage in your area. To resolve this, check the circuit breaker or fuse box and replace or reset it as necessary. If the power supply is not the issue, the power cord itself might be damaged or faulty. In this case, a professional should be called to replace the cord.
2. Door Switch Malfunction
The door switch is a safety feature that prevents the dryer from operating while the door is open. If the door switch is defective, the dryer won’t start. You can test the door switch with a multimeter for continuity – a continuous electrical path present in the part. If the door switch does not have continuity, replace it.
3. Start Switch Problems
The start switch triggers the dryer to begin its operation. If it’s defective, the dryer won’t start. To determine if the start switch is defective, use a multimeter to test it for continuity. If the switch does not have continuity, it needs to be replaced.
4. Thermal Fuse Issues
The thermal fuse is a safety device designed to protect the dryer from overheating. If the thermal fuse has blown, the dryer won’t start. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
5. Drive Motor Failure
The drive motor turns the drum and the blower wheel to exhaust the air. If the drive motor is defective, the dryer won’t start. To determine if the drive motor is at fault, you’ll need to try turning the drum by hand. If the drum does not rotate freely, check the drive motor to see if it’s seized. If it is, it needs to be replaced.
6. Control Board Problems
The main control board might be defective. However, this is rarely the case. Before replacing the main control board, check all of the more commonly defective parts. If you have determined that all of the other components are working properly, replace the main control board.
7. Timer Malfunction
The timer is a part of the control console of the dryer. It consists of a small motor connected to a series of gears that rotate cams, which turn electric contacts off and on inside the timer. If the timer isn’t advancing while the dryer is running, the timer motor could be at fault. Replacing this part can correct this problem.
Maytag Bravos Dryer Won’t Start Just Clicks
Experiencing a Maytag Bravos dryer that won’t start and just clicks can be quite frustrating. This issue often indicates a problem with the start switch or the thermal fuse.
The start switch triggers the dryer’s motor. If it’s defective, you’ll hear a clicking sound, but the dryer won’t start. Testing the start switch with a multimeter can confirm if it’s the culprit.
On the other hand, the thermal fuse is a safety device designed to protect the dryer from overheating. It blows if the dryer gets too hot. A blown thermal fuse can also cause the dryer to click but not start.
Checking the continuity of the thermal fuse with a multimeter can help identify if it’s the problem. Remember, safety first. Always unplug the dryer before attempting any repairs.
Learn More: Can You Get Bed Bugs from Laundromat Dryer
Bravos Dryer Problems: The Preventive Actions
1. Regular cleaning is crucial. Lint build-up in the lint trap, exhaust vent, or around the drum can cause overheating and other issues. Cleaning these areas after every use can prevent potential problems.
2. Checking the dryer’s leveling can also prevent issues. An unbalanced dryer can cause unnecessary wear and tear on the components, leading to premature failure.
3. Inspecting the power cord and outlet periodically is also beneficial. Damaged cords or faulty outlets can cause power issues, preventing the dryer from turning on.
4. Regularly checking the door switch for any signs of wear or damage can prevent the dryer from not starting. The dryer won’t start if the door switch is defective as it’s a safety feature to prevent the dryer from operating with the door open.
Bravos XL Dryer Reset
Resetting a Bravos XL dryer can often solve minor issues such as the dryer not starting or not heating. To reset the dryer, start by unplugging it from the power source. Wait for about a minute and then plug it back in. Open and close the dryer door firmly. Select the desired cycle and press “Start”.
In some cases, a hard reset might be necessary. This involves unplugging the dryer, waiting for about 10 minutes, and then plugging it back in.
If the dryer still doesn’t work after a reset, it might indicate a more serious issue that requires professional attention. Always consult your user manual or a professional technician for guidance.
Read More:
