5 Common Beacon Morris Garage Heater Problems and Solutions

Beacon Morris garage heaters are known for their reliability and efficiency. Yet, like any mechanical device, they can encounter problems.

The most common issue is the heater not working. This could be due to a faulty control board, which is the heart of the heater’s operation. If the control board malfunctions, the heater may fail to start or operate correctly. The heater blowing cold air is another prevalent issue. This could be a result of the heater’s fan not working properly, which is responsible for distributing the heat.

The heater may also display error codes, such as 2 flashes or 4 flashes. These flashes are indicative of specific problems. For instance, 2 flashes might suggest an issue with the pressure switch, a critical component that ensures the heater operates under safe conditions. On the other hand, 4 flashes could point towards a problem with the igniter, which is essential for starting the heater.

In some cases, the heater might require replacement parts. Beacon Morris provides a range of parts for their garage heaters, ensuring that any issues can be resolved promptly and efficiently. From control boards to igniters, the availability of these parts makes it easier to maintain and repair the heaters.

Learn More: Troubleshooting a Black & Decker Heater

5 Common Issues with Beacon Morris Garage Heaters

1. Inadequate Heating

One of the most common issues with Beacon Morris garage heaters is inadequate heating. This could be due to several reasons:

Thermostat issues: The thermostat might not be set correctly or could be malfunctioning. Try adjusting the thermostat settings. If this doesn’t work, consider replacing the thermostat.

Blocked air filters: Dirty or blocked air filters can restrict airflow, reducing the heater’s efficiency. Regularly clean or replace the air filters to ensure optimal performance.

Insufficient fuel: Check the fuel supply. If the heater runs on gas, ensure the gas supply is adequate and the connection is secure.

2. Heater Not Starting

If the heater doesn’t start, it could be due to:

Power issues: Check if the heater is plugged in and the circuit breaker is not tripped. If the heater is gas-powered, ensure the pilot light is on.

Faulty ignition system: If the ignition system is faulty, the heater won’t start. In this case, professional help might be required for repair or replacement.

3. Unusual Noises

Unusual noises from the heater could indicate a problem. Here are some potential causes:

Loose parts: Loose screws or parts can cause rattling noises. Tighten any loose parts to resolve this issue.

Fan issues: If the fan is damaged or obstructed, it can cause unusual noises. Inspect the fan for any visible damage or obstructions and rectify them as necessary.

4. Frequent Cycling

If the heater frequently turns on and off, it could be due to:

Thermostat issues: A malfunctioning thermostat could cause the heater to cycle frequently. Consider replacing the thermostat if adjusting its settings doesn’t resolve the issue.

Overheating: If the heater is overheating, it might shut off frequently as a safety measure. Ensure the heater is not covered or blocked in any way that could cause overheating.

5. Leaking

If the heater is leaking, it could be due to:

Damaged seals: Over time, seals can wear out and cause leaks. Replace any damaged seals to fix this issue.

Corrosion: Corrosion can cause holes in the heater, leading to leaks. If the heater is corroded, it might need to be replaced.

Read More: 9 Common Tankless Water Heater Problems & Their Fixes

FAQs

What Are the Common Problems with Beacon Morris Garage Heaters?

Common problems with Beacon Morris garage heaters include the heater not working, blowing cold air, or displaying error flashes. These issues could be due to a faulty control board, fan, pressure switch, or igniter.

How Can I Fix a Beacon Morris Garage Heater That’s Not Working?

If your Beacon Morris garage heater is not working, the issue could be with the control board. You may need to replace the control board to resolve this problem.

Why Is My Beacon Morris Garage Heater Blowing Cold Air?

If your Beacon Morris garage heater is blowing cold air, it could be due to a malfunctioning fan. Check the fan for any visible damage and replace it if necessary.

What Do 2 Flashes Mean on a Beacon Morris Garage Heater?

Two flashes on a Beacon Morris garage heater might indicate an issue with the pressure switch. Inspect the pressure switch for any defects and replace it if needed.

What Do 4 Flashes Mean on a Beacon Morris Garage Heater?

Four flashes on a Beacon Morris garage heater could suggest a problem with the igniter. To resolve this, you may need to replace the igniter.

What Should I Do If the Fan on My Beacon Morris Garage Heater Is Not Working?

If the fan on your Beacon Morris garage heater is not working, it could be due to a mechanical issue or a power supply problem. Check the fan motor and power supply, and replace any faulty components.

Where Can I Find Replacement Parts for My Beacon Morris Garage Heater?

Beacon Morris provides a range of parts for their garage heaters. If any part of the heater is faulty, you can order the necessary replacement parts from Beacon Morris. This includes control boards, fans, pressure switches, and igniters.

Learn More: Rocket Mass Heaters: 6 Common Issues and Solutions